Investigation on the Adoption of Autonomous Construction: A Case Study in Construction Companies
DOI:
https://doi.org/10.25299/ijbs.2026.26441Keywords:
Autonomous Construction, Construction 4.0, Sustainability, Construction IndustryAbstract
Purpose: The Malaysian construction industry is shifting towards Construction 4.0 with autonomous construction to improve productivity and support national sustainability goals. This research examines the benefits and critical barriers to the adoption of autonomous construction in Malaysia.
Design/methodology/approach: This research employed a qualitative methodology, using semi-structured interviews with six informants from construction companies in Malaysia who had relevant experience in planning, execution, or management of construction within their organizations.
Findings: The benefits of autonomous construction were identified, including time saving, improved quality, enhanced safety, cost effectiveness, and reduction in manual labour dependency. In addition, high costs, a lack of skilled workforce, resistance to change, technological maturity, and job security concerns were identified as the barriers to adopting autonomous construction.
Limitations and Research implications: This study implied qualitative approach using semi-structured interviews, which limits the generalizability of the findings. As the research focused on Malaysia, the results may not reflect conditions in other regions. The absence of quantitative data also makes it difficult to measure the extent of the benefits and barriers of autonomous construction.
Practical Implications: Findings of this research offer guidance to industry stakeholders and policymakers to design strategies, targeted training programs, and policy revisions to facilitate the industry’s movement towards the adoption of autonomous construction.
Originality/value: This study provides empirical evidence on the adoption of autonomous construction in Malaysia, offering context-specific insights into its benefits and barriers that remain underexplored in existing literature.
Downloads
References
Abbasnejad, B., Soltani, S., Karamoozian, A., & Gu, N. (2024). A systematic literature review on the integration of Industry 4.0 technologies in sustainability improvement of transportation construction projects: state-of-the-art and future directions. Smart and Sustainable Built Environment. https://doi.org/10.1108/sasbe-11-2023-0335
Adebayo, Y., Udoh, P., Kamudyariwa, X. B., & Osobajo, O. A. (2025). Artificial intelligence in construction project management: A structured literature review of its evolution in application and future trends. Digital, 5(3), 26. https://doi.org/10.3390/digital5030026
Alaloul, W. S., Alzubi, K. M., Malkawi, A. B., Al Salaheen, M., & Musarat, M. A. (2022). Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management, 29(7), 2760-2785. https://doi.org/10.1108/ECAM-03-2021-0211
Alnajjar, O., Atencio, E., & Turmo, J. (2025). A Systematic Review of Lean Construction, BIM and Emerging Technologies Integration: Identifying Key Tools. Buildings, 15(16), 2884. https://doi.org/10.3390/buildings15162884
Aripin, N. M., Mezhuyev, V., Nawanir, G., Yusuf, M. F., & Haron, N. R. H. M. (2023). Unveiling key drivers of Industry 4.0 adaptation in CKD automotive manufacturing companies: evidence from Asia and South America. IEEE Access, 11, 136049-136062. https://doi.org/10.1109/ACCESS.2023.3337426
Asif, M., Naeem, G., & Khalid, M. (2024, 2024-03-01). Digitalization for sustainable buildings: Technologies, applications, potential, and challenges. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2024.141814
Balasubramanian, S., Shukla, V., Islam, N., & Manghat, S. (2021). Construction industry 4.0 and sustainability: an enabling framework. IEEE Transactions on Engineering Management, 71, 1-19. https://doi.org/10.1109/TEM.2021.3110427
Basir, E. K. (2025). AI drives nation’s construction industry revolution. BERNAMA. Retrieved September 7 from
Busetto, L., Wick, W., & Gumbinger, C. (2020). How to use and assess qualitative research methods. Neurological Research and Practice, 2. https://doi.org/10.1186/s42466-020-00059-z
Chan, T. K., & Abdul-Aziz, A.-R. (2020). Construction industry development in Malaysia. In Improving the Performance of Construction Industries for Developing Countries (pp. 222-239). Routledge.
Creswell, J. W., Klassen, A. C., Plano Clark, V. L., & Smith, K. C. (2011). Best practices for mixed methods research in the health sciences. National Institutes of Health, 2013, 541-545.
Dehdasht, G., Ferwati, M. S., Abidin, N. Z., & Oyedeji, M. O. (2022). Trends of construction industry in Malaysia and its emerging challenges. Journal of Financial Management of Property and Construction, 27(2), 161-178. https://doi.org/10.1108/JFMPC-08-2020-0054
Delgado, J. M. D., Oyedele, L., Ajayi, A., Akanbi, L., Akinade, O., Bilal, M., & Owolabi, H. (2019). Robotics and automated systems in construction: Understanding industry-specific challenges for adoption. Journal of building engineering, 26, 100868. https://doi.org/10.1016/j.jobe.2019.100868
Dhamak, P., Aital, P., & Daftardar, A. (2025). A comprehensive overview of Construction 4.0 technologies and their implementation in the construction industry. Journal of Science and Technology Policy Management. https://doi.org/10.1108/JSTPM-09-2023-0162
Farsangi, E. N., Noori, M., Yang, T., Sarhosis, V., Mirjalili, S., & Skibniewski, M. J. (2025). Digital Transformation in the Construction Industry: Sustainability, Resilience, and Data-Centric Engineering. Woodhead Publishing.
Fei, W., Opoku, A., Agyekum, K., Oppon, J. A., Ahmed, V., Chen, C., & Lok, K. L. (2021). The critical role of the construction industry in achieving the sustainable development goals (SDGs): Delivering projects for the common good. Sustainability, 13(16), 9112. https://doi.org/10.3390/su13169112
Frank, M., Ruvald, R., Johansson, C., Larsson, T., & Larsson, A. (2019). Towards autonomous construction equipment-supporting on-site collaboration between automatons and humans. International Journal of Product Development, 23(4), 292-308. https://doi.org/10.1504/IJPD.2019.105496
Hwang, B.-G., Li, Y.-S., Shan, M., & Chua, J.-E. (2020). Prioritizing critical management strategies to improving construction productivity: empirical research in Singapore. Sustainability, 12(22), 9349. https://doi.org/10.3390/su12229349
Jaafar, M., Salman, A., Ghazali, F. E. M., Zain, M. Z. M., & Kilau, N. M. (2024). The awareness and adoption level of emerging technologies in Fourth Industrial Revolution (4IR) by contractors in Malaysia. Ain Shams Engineering Journal, 15(5), 102710. https://doi.org/10.1016/j.asej.2024.102710
Kim, K., Tiedmann, H. R., & Faust, K. M. (2024). Construction industry changes induced by the COVID-19 pandemic. Engineering, Construction and Architectural Management. 32 (7), 4413–4438. https://doi.org/10.1108/ECAM-09-2023-0983
McCutcheon, D. M., & Meredith, J. R. (1993). Conducting case study research in operations management. Journal of operations management, 11(3), 239-256. https://doi.org/10.1016/0272-6963(93)90002-7
Melenbrink, N., Werfel, J., & Menges, A. (2020). On-site autonomous construction robots: Towards unsupervised building. Automation in Construction. https://doi.org/10.1016/j.autcon.2020.103312
Murguia, D., Soetanto, R., Szczygiel, M., Goodier, C. I., & Kavuri, A. (2026). Construction 4.0 implementation for performance improvement: an innovation management perspective. Construction Innovation, 26(3), 843-870. https://doi.org/10.1108/CI-08-2023-0184
Musarat, M. A., Alaloul, W. S., Zainuddin, S. M. B., Qureshi, A. H., & Maqsoom, A. (2024). Digitalization in Malaysian construction industry: Awareness, challenges and opportunities. Results in Engineering, 21, 102013. https://doi.org/10.1016/j.rineng.2024.102013
Oti-Sarpong, K., Pärn, E. A., Burgess, G., & Zaki, M. (2022). Transforming the construction sector: An institutional complexity perspective. Construction Innovation, 22(2), 361-387. https://doi.org/10.1108/CI-04-2021-0071
Peng, H., Wang, X., Wu, H., & Huang, B. (2025). Human-Computer Interaction Empowers Construction Safety Management: Breaking Through Difficulties to Achieving Innovative Leap. Buildings. https://doi.org/10.3390/buildings15050771
Rani, N. I. A., Ismail, S., Mohamed, Z., & Mat Isa, C. M. (2023). Competitiveness framework of local contractors in the Malaysian construction industry towards globalisation and liberalisation. International Journal of Construction Management, 23(3), 553-564. https://doi.org/10.1080/15623599.2021.1895485
Sargeant, J. (2012). Qualitative Research Part II: Participants, Analysis, and Quality Assurance. Journal of graduate medical education, 4 1, 1-3. https://doi.org/10.4300/JGME-D-11-00307.1
Shafei, H., Rahman, R. A., & Lee, Y. S. (2025). Evaluating construction 4.0 technologies in enhancing safety and health: case study of a national strategic plan. Journal of Engineering, Design and Technology, 23(4), 1211-1242. https://doi.org/10.1108/JEDT-08-2023-0330
Staccioli, J., & Virgillito, M. E. (2021). Back to the past: the historical roots of labor-saving automation. Eurasian Business Review, 11(1), 27-57. https://doi.org/10.1007/s40821-020-00179-1
Statsenko, L., Samaraweera, A., Bakhshi, J., & Chileshe, N. (2023). Construction 4.0 technologies and applications: A systematic literature review of trends and potential areas for development. Construction Innovation, 23(5), 961-993. https://doi.org/10.1108/CI-07-2021-0135
Su, S., Sun, A., Yan, H., Wang, Q., Li, L., & Zhu, J. (2025). Optimization of construction program for economic and environmental sustainability. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2024.115006
Vadukkumchery, A. S., & Myneni, K. K. (2023). Assessment of Impact of Mechanization in Construction Projects in India. Indian Journal of Science and Technology. https://doi.org/10.17485/ijst/v16i10.1467
Wong, J. M., Ng, S. T., & Chan, A. P. (2010). Strategic planning for the sustainable development of the construction industry in Hong Kong. Habitat International, 34(2), 256-263. https://doi.org/10.1016/j.habitatint.2009.10.002
Yildirim, N., Gultekin, D., Hürses, C., & Akman, A. M. (2025). Exploring national digital transformation and Industry 4.0 policies through text mining: a comparative analysis including the Turkish case. Journal of Science and Technology Policy Management, 16(3), 555-590. https://doi.org/10.1108/JSTPM-07-2022-0107
Yin, R. (1994). Case Study Research: Design and Methods (2nd ed.). Sage Publications.
Yin, R. K. (2013). Case study research: Design and Methods. 14(1), 69-71. (Thousand Oaks, CA: SAGE)
Yitmen, I., Almusaed, A., Hussein, M., & Almssad, A. (2025). AI-Driven Digital Twins for Enhancing Indoor Environmental Quality and Energy Efficiency in Smart Building Systems. Buildings. https://doi.org/10.3390/buildings15071030
Zhao, S., Wang, Q., Fang, X., Liang, W., Cao, Y., Zhao, C., Li, L., Liu, C., & Wang, K. (2022). Application and development of autonomous robots in concrete construction: Challenges and opportunities. Drones, 6(12), 424. https://doi.org/10.3390/drones6120424
