Characterization of Porang and Xanthan Gum Solutions for Polymer Flooding
Abstract
Porang tubers contain glucomannan which is used in various industries. Porang is a biopolymer that has the potential to be applied in polymer flooding in oil reservoirs. In this research, a combination of porang and Xanthan gum was used for displacing oil in the laboratory. The samples analyzed varied with polymer concentrations of 2000, 4000, and 6000 ppm respectively for porang solution, Xanthan gum, and a mixture of porang and Xanthan gum. The salinity of the formation water used in this research was 6000, 12000 and 18000 ppm. The experiment aimed to observe the characteristics and performance of porang and Xanthan gum including testing for compatibility, viscosity, adsorption and sandpack flooding. Based on the test results, all samples were compatible. The application of a mixture of porang and Xanthan gum provided lower adsorption compared to the application of only Xanthan gum. The highest reduction in adsorption value given was 3.545 mg/gr. The highest viscosity and additional recovery factor were given by a mixture of porang and Xanthan gum with a concentration of 6,000 ppm and a salinity of 18,000 ppm, namely 284.72 cP and 16.1%, respectively.
Full text article
References
Abirov, R. Zh., & Eremin, N. A. (2019). Applying of the Associative Polymer Solutions to Enhance Oil Recovery, IOP Conference Series: Materials Science and Engineering, vol. 700, no. 1, hh. 012062. https://doi.org/10.1088/ 1757-899X/700/1/012062.
Adianto, M. O. (2022). Analisis Aditif Efek Mesona Palustris (Cincau Hitam) Terhadap Sifat Larutan Polimer Kitosan dan Poliakrilamida. MS Thesis, Universitas Trisakti, Jakarta.
Afdi, R. (2022). Efek Cyclea Barbata Miers Terhadap Sifat Larutan Polimer Xanthan Gum dan Poliacrylamide. MS Tesis, Universitas Trisakti, Jakarta.
Agi, A., Junin, R., Gbonhinbor, J., & Onyekonwu, M. (2018). Natural Polymer Flow Behaviour in Porous Media for Enhanced Oil Recovery Applications: A Review. Journal of Petroleum Exploration and Production Technology, 8(4), 1349–1362. https://doi.org/10.1007/s13202-018-0434-7.
Akesowan, A. (2002). Viscosity and Gel Formation of a Konjac Flour from Amorphophallus oncophyllus. AU Journal of Technology, 5(3), 1-8. http://www.assumptionjournal.au.edu/index.php/aujournaltechnology/article/view/1184.
Ansyori, M. R. (2018). Mengenal Enhanced Oil Recovery (EOR) Sebagai Solusi Meningkatkan Produksi Minyak, Swara Patra: Majalah Ilmiah PPSDM Migas, 8(2), 16–22. https://ejurnal.ppsdmmigas.esdm.go.id/sp/index.php/swarapatra/article/view/25
Arina & Kasmungin, S. (2016). Studi Peningkatan Produksi Minyak Dengan Metode Injeksi Polimer Ditinjau Dari Bermacam Salinitas Air Formasi, Proceeding Seminar Nasional Cendekiawan 2015, Jakarta.
Ayoola A. A., Sanni S. E., Ajayi O. M., Ojo T., Omonigbeyin O., Ajayi A. A., & Olawole O. C. (2018). Production of a Novel Bio-Polymer for Enhanced Oil Recovery and Modelling the Polymer Viscosity Using Artificial Neural Network (ANN). International Journal of Mechanical Engineering and Technology (IJMET), 9(12), 563–574.
Azmi, G. E., Saada, A. M., Shokir, E. M., El-Deab, M. S., Attia, A. M., & Omar, W. a. E. (2022). Adsorption of the Xanthan Gum Polymer and Sodium Dodecylbenzenesulfonate Surfactant in Sandstone Reservoirs: Experimental and Density Function Theory Studies. ACS Omega, 7(42), 37237–37247. https://doi.org/10.1021/acsomega.2c03488.
Chandrasekaran, R., Puigjaner, L. C., Joyce, K. L., & Arnott, S. (1988). Cation interactions in gellan: An x-ray study of the potassium salt. Carbohydrate Research, 181, 23–40. https://doi.org/10.1016/0008-6215(88)84020-5
Chen, Q., Ye, Z., Tang, L., Wu, T., Jiang, Q., & Lai, N. (2020). Synthesis and Solution Properties of a Novel Hyperbranched Polymer Based on Chitosan for Enhanced Oil Recovery, Polymers, 12(9), 2130. https://doi.org/10.3390/polym12092130.
Chen, Y., He, H., Yu, Q., Liu, H., Chen, L., Ma, X., & Liu, W. (2021). Insights into Enhanced Oil Recovery by Polymer-Viscosity Reducing Surfactant Combination Flooding in Conventional Heavy Oil Reservoir. Geofluids, 2021(1), 1–12. https://doi.org/10.1155/2021/7110414.
Fathaddin, M. T., Maulida, F., Hattu, V. P. B., Ulfah, B. M, Adianto, M. O., & Afdi, R. (2024). The Use of Natural Polymers to Enhance Oil Recovery, E3S Web of Conferences 500 (2024), (pp. 03025). https://doi.org/10.1051/e3sconf/202450003025.
Figdore, P. E. (1982). Adsorption of Surfactants on Kaolinite: NaCl versus CaCl2 Salt Effects. J. Colloid Interface Sci., 87(2), 500–517. https://doi.org/10.1016/0021-9797(82) 90347-2.
Frigrina, L., Kasmungin, S., & Mardiana, D. A. (2017). Studi Polimer Gel Dengan Crosslinker Mengenai Pengaruh Variasi Konsentrasi Polymer, Salinitas, Dan Suhu Terhadap Gelation Time Dan Resistance Factor. Prosiding Seminar Nasional Cendekiawan 3, Jakarta. https://doi.org/10.25105/semnas.v0i0.2148.
Gao, C. (2015). Application of a novel biopolymer to enhance oil recovery. Journal of Petroleum Exploration and Production Technology, 6(4), 749–753. https://doi.org/10.1007/s13202-015-0213-7.
Green, D. W. & Willhite, G. P. (2018). Enhanced Oil Recovery, SPE International textbook series (2nd Edition). Richardson, Texas, USA: Society of Petroleum Engineers (SPE).
Hatakeyama, H., & Hatakeyama, T. (1998). Interaction between water and hydrophilic polymers. Thermochimica Acta, 308(1–2), 3–22. https://doi.org/10.1016/s0040-6031(97)00325-0.
Herawati, H. (2018). Potensi Hidrokoloid Sebagai Bahan Tambahan Pada Produk Pangan Dan Nonpangan Bermutu. Jurnal Penelitian Dan Pengembangan Pertanian, vol. 37(1), 17. https://doi.org/10.21082/jp3.v37n1.2018.p17-25.
Jiang, T., Zhao, J., & Zhang, J. (2022). Splitting Tensile Strength and Microstructure of Xanthan Gum-Treated Loess. Scientific Reports 12(1), 9921. https://doi.org/10.1038/s41598-022-14058-4.
Kirshenbaum, A.D., Cahill, J.A., McGonigal, P.J., & Grosse, A.V. (1962). The Density of Liquid NaCl and KCl and an Estimate of Their Critical Constants Together with Those of the Other Alkali Halides. Journal of Inorganic and Nuclear Chemistry, 24(10), 1287–1296. https://doi.org/10.1016/0022-1902(62)80205-X.
Lestari, A. Y. D., Djaeni, M., & Fuadi, A. M. (2016). Modified Starch of Amorphophallus Campanulatus as a Novel Adsorbent for Water Adsorption. In Reaktor, Reaktor (Vols. 16–16, Issue 1, pp. 9–16). http://dx.doi.org/10.14710/reaktor.16.1.9-16
Makhado, E., Pandey, S., Nomngongo, P. N., & Ramontja, J. (2017). Preparation and characterization of xanthan gum-cl-poly(acrylic acid)/o-MWCNTs hydrogel nanocomposite as highly effective re-usable adsorbent for removal of methylene blue from aqueous solutions. Journal of Colloid and Interface Science, 513, 700–714. https://doi.org/10.1016/j.jcis.2017.11.060.
Mao, C., Klinthong, W., Zeng, Y., & Chen, C. (2012). On the interaction between konjac glucomannan and xanthan in mixed gels: An analysis based on the cascade model. Carbohydrate Polymers, 89(1), 98–103. https://doi.org/10.1016/j.carbpol.2012.02.056
Morris, V. J. (1998). Gelation of polysaccharides. In S. E. Hill, D. A. Ledward, & J. R. Mitchell (Eds.), Functional properties of food macromolecules (2nd ed) (pp. 143–226). Gaithersburg, MD: Aspen Publishers.
Mukkun, L., Songgor, K., Lalel, H.L., Rubak, Y.T., Roefaida, E., Tae, A. S. J. A., Cakswindryandani, N.L.P.R., & Nalle, R.P.I. (2022). Physical Characteristics, Water Content, And Glucomanan Content of Porang Flour (Amorphophallus muelleri Blume) Using Some Soaking Techniques. Agrisa, 11(2), 122-130. https://doi.org/10.35508/agrisa.v11i2.9300.
Paternina, C. A., Londoño, A. K., Rondon, M., Mercado, R., & Botett, J. (2020). Influence of Salinity and Hardness on the Static Adsorption of an Extended Surfactant for an Oil Recovery Purpose. Journal of Petroleum Science and Engineering, vol. 195, 107592. https://doi.org/10.1016/j.petrol.2020.107592.
Putra, B. P., & Kiono, B. F. T. (2021). Mengenal Enhanced Oil Recovery (EOR) Sebagai Solusi Meningkatkan Produksi Minyak Indonesia. Jurnal Energi Baru dan Terbarukan, 2(2), 84-100. https://doi.org/10.14710/jebt.2021.11152.
Rita, N. (2012). Studi Mekanisme Injeksi Surfaktan-Polimer Pada Reservoir Berlapis Lapangan NR Menggunakan Simulasi Reservoir. Journal of Earth Energy Engineering, vol. 1(1), 22–36. https://doi.org/10.22549/jeee.v1i1.926.
Saleh, L. D., Wei, M., Zhang, Y., & Bai, B. (2017). Data Analysis for Polymer Flooding That Is Based on a Comprehensive Database. SPE Reservoir Evaluation & Engineering, 20(04), 0876–93. https://doi.org/10.2118/169093-PA.
Siahaya, J., Mardiana, D. A., & Fathaddin, M. T. (2023). Characterization of Addition Porang on Polyacrylamide Polymer for Enhanced Oil Recovery. Journal of Earth Energy Science, Engineering, and Technology, 6(3), 103-106. https://doi.org/10.25105/jeeset.v6i3.17423.
Sydansk, D. & Romero-Zeron, L. (2011). Reservoir Conformance Improvement. San Antonio, Texas: Society of Petroleum Engineers.
Tako, M., Sakae, A., & Nakamura, S. (1989). Rheological properties of gellan gum in aqueous media. Agricultural and Biological Chemistry, 53(3), 771–776. https://doi.org/10.1271/bbb1961.53.771.
Ulfah, B. M. (2023). Karakterisasi Dan Penerapan Polimer Kitosan Udang Dan Rajungan Dengan Berbagai Konsentrasi Dan Salinitas Untuk Pendesakan Minyak Menggunakan Sandpack. MS Thesis, Universitas Trisakti, Jakarta.
Win, M. L. (2021). Uncertainty of Factor Z in Gravimetric Volume Measurement. ACTA IMEKO, 10(3), 199. https://doi.org/10.21014/acta_imeko.v10i3.1125.
Wu, K., Zhu, Q., Qian, H., Xiao, M., Corke, H., Nishinari, K., & Jiang, F. (2017). Controllable hydrophilicity-hydrophobicity and related properties of konjac glucomannan and ethyl cellulose composite films. Food Hydrocolloids, 79, 301–309. https://doi.org/10.1016/j.foodhyd.2017.12.034.
Xanthan gum. (2024). Periodical by Knowde, https://periodical.knowde.com/xanthan-gum/. Accessed on August 5, 2024.
Yanuriati, A., Marseno, D. W., Rochmadi, & Harmayani, E. (2017). Gel Glukomanan Porang-Xantan Dan Kestabilannya Setelah Penyimpanan Dingin Dan Beku. Agritech, 37(2), 121.-131 https://doi.org/10.22146/agritech.10793.
Yasahardja, Y., Setiawan, A., & Prihantini, A. (2017). Studi Awal Pemilihan Polimer Untuk Digunakan Pada Injectivity Dengan Skala Laboratorium. Jurnal Migasian, 1(2), 19-22, https://doi.org/10.36601/jurnal-migasian.v1i2.11.
Yaseen, E., Herald, T., Aramouni, F., & Alavi, S. (2004). Rheological properties of selected gum solutions. Food Research International, 38(2), 111–119. https://doi.org/10.1016/j.foodres.2004.01.013.
Zhang, J., Zeng, L., & Feng, J. (2016). Dynamic covalent gels assembled from small molecules: from discrete gelators to dynamic covalent polymers. Chinese Chemical Letters, 28(2), 168–183. https://doi.org/10.1016/j.cclet.2016.07.015
Zhang, P., Bai, S., Chen, S., Li, D., Jia, Z., & Zhou, C. (2018). Preparation, Solution Characteristics and Displacement Performances of a Novel Acrylamide Copolymer for Enhanced Oil Recovery (EOR). Polymer Bulletin, vol. 75(3), 1001–1011. https://doi.org/10.1007/s00289-017-2080-5.
Authors
Copyright (c) 2024 Andrian Sutiadi, Jacob Siahaya, Fajri Maulida, Dwi Atty Mardiana, Muhammad Taufiq Fathaddin, Rini Setiati, Pri Agung Rakhmanto, Sonny Irawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This is an open access journal which means that all content is freely available without charge to the user or his/her institution. The copyright in the text of individual articles (including research articles, opinion articles, and abstracts) is the property of their respective authors, subject to a Creative Commons CC-BY-SA licence granted to all others. JEEE allows the author(s) to hold the copyright without restrictions and allows the author to retain publishing rights without restrictions.