Synthesis and characterization of iron nanoparticles using leaves extract of Phyllanthus amarus and its application in crystal-violet degradation
Keywords:
Crystal Violet dye Iron, Iron Oxide, Nanoparticles, Phyllanthu Amarus, Crystal Violet dye.Abstract
Nanomaterials play a crucial role in the photocatalytic degradation of dyes in wastewater. In this study, iron oxide nanoparticles (Fe₃O₄-NPs) were synthesized via a green approach using Phyllanthus amarus leaf extract and evaluated for their effectiveness in degrading crystal violet, a common cationic dye. The novelty of this work lies in the dual functionality of P. amarus extract as both reducing and capping agent, offering a sustainable and eco-friendly alternative to conventional physical and chemical synthesis methods. Fresh P. amarus leaves harvested from the Federal University of Technology Owerri were processed into aqueous extract and reacted with 0.01 M FeCl₃·6H₂O in a 1:1 volume ratio, leading to a rapid color change indicating nanoparticle formation. The synthesized nanoparticles (PaFeNPs) were characterized using UV-Vis spectroscopy, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). UV-Vis analysis revealed a characteristic absorption peak at 286 nm due to surface plasmon resonance. XRD confirmed the presence of Fe₃O₄ with an average crystallite size of ~9.13 nm, while SEM and TEM revealed irregular morphologies and an average particle size of ~86.2 nm, indicating aggregation due to magnetic interactions. The photocatalytic activity of PaFeNPs was tested under UV and dark conditions. Results showed up to 89% degradation of crystal violet within 90 minutes under UV light, significantly outperforming the dark condition, thereby confirming their light-assisted catalytic potential. The presence of bioactive phytochemicals such as flavonoids, terpenoids, and reducing sugars in the extract contributed to the efficient synthesis and stabilization of the nanoparticles. This study demonstrates the feasibility of Phyllanthus amarus-mediated green synthesis of iron oxide nanoparticles as a cost-effective, environmentally safe, and scalable solution for industrial dye remediation.
Downloads
References
Adewoye, S.O. and Lateef, A. (2004): Assessment of the microbiological quality of Clarias gariepinus exposed to an industrial effluent in Nigeria. The Environmentalist (now Environment Systems and Decisions), 24: 249-254.
Anandan, S., Hebalkar, N., Sarada, B.V. and Rao, T.N. (2016): Nanomanufacturing for aerospace applications. In: Aerospace materials and material technologies. Singapore: Springer. p. 85–101.
Aghdam, M. T. B., Mohammadi, H. and Ghorbanpour, M. (2016): Effects of nanoparticulate anatase titanium dioxide on physiological and biochemical performance of Linum usitatissimum (Linaceae) under well-watered and drought stress conditions. Braz Journal Bot, 39:139–46.
Bang, J. H. and Kamat, P. V. (2011): CdSe quantum dot-fullerene hybrid nanocomposite for solar energy conversion: electron transfer and photoelectrochemistry. ACS Nano. 5(12):9421–7.
Binnig, G. and Rohrer, H. (2005): Scanning tunneling microscope. Scientiftic American. 253:50–6.
Brans, W.L., Dereux, A. and Ebbesen, T.W., (2003): Nature, 424, 824.
Dabbs, D.M. and Aksay, I.A. (2017): Self-assembled ceramics produced by complex-fluid templation. Ann Rev Phys Chem, 51(1):601–22.
Devatha, C.P., Kumar, A. and Katte, S.Y. (2016): Green synthesis of iron nanoparticles using different leaf extracts for treatment of domestic waste water. J. Clean. Prod., 139, 1425–1435.
Dinali, R., Ebrahiminezhad, A., Manley-Harris, M., Ghasemi, Y. and Berenjian, A. (2017): Magnetic immobilization of bacteria using iron oxide nanoparticles. Biotechnology Letters. https://doi.org/10.1007/s10529-017-2477-0.
Ebrahimi, N., Mansoori, G. A., (2014): Reliability for drug targeting in cancer treatment through nanotechnology (a psychometric approach). International Journal of Medical Nano Research. 1:1–5.
Enshirah, D., Amel, T. and Eman, A. (2018): Green synthesis of iron nanoparticles by Acacia nilotica pods extract and its catalytic, adsorption, and antibacterial activities. Applied Sciences, 8(10): 5-17. https:// doi:10.3390/app8101922.
Goodhew, P. J., Humphreys, J., and Beanland, R. (2018): Electron Microscopy and Analysis, Taylor and Francis, London and New York. 4(3), 51-53.
Guo, J., Wang, R., Tjiu, W. W., Pan, J. and Liu, T. (2012): Synthesis of Fe nanoparticles@ graphene composites for environmental applications. Journal of Hazardous Materials, 225, 63–73.
Herlekar, M., Barve, S., and Kumar, R. (2014): Plant-mediated green synthesis of iron nanoparticles. Journal of Nanoparticle Research, 1–9.
Heath, J.R., O’Brien, S.C., Zhang, Q., Lui, Y., Curl, R.F., Tittel, F.K. and Smalley, R.E. (2005): Lanthanum complexes of spheroidal carbon shells. Journal Am Chem Soc, 107:7779–80.
Iijima S, Brabec C, Maiti A, Bernholc J. Structural flexibility of carbon nanotubes. Journal of Chemical Physics, 104(5):2089–92.
Jassal, V., Shanker, U. and Gahlot, S. (2016): Green synthesis of some iron oxide nanoparticles and their interaction with 2-amino, 3-amino and 4-aminopyridines. Materials Today, 3(6), 1874–1882.]
Kamzin, A.S., Valiullin, A.A., Khurshid, H., Nemati, Z., Srikanth, H., Phan, M.H. and Mössbauer. (2018): Studies of Core–Shell FeO/Fe3O4 Nanoparticles. Phys. Solid State, 60, 382–389.
Kubde, P.L. and Meenal, S. (2010): Lagenaria siceraria: Phytochemistry, pharmacognosy and pharmacological studies. Rep Opi., 2(3): 91-98.
Lee, J., Mahendra, S. and Alvarez, P. J. J., (2010): Nanomaterials in the construction industry: a review of their applications and environmental health and safety considerations. ACS Nano, 4(7):3580–90.
Li, Y., Lee, N.H., Hwang, D.S., Song, J.S., Lee, E.G. and Kim, S.J. (2004): Synthesis and characterization of nano titania powder with high photoactivity for gas-phase photo-oxidation of benzene from TiOCl2 aqueous solution at low temperatures. Langmuir, 20(25):10838–44.
Machado, S., Pacheco, J.G., Nouws, H.P., Albergaria, J.T. and Delerue-Matos, C. (2015): Characterization of green zero-valent iron nanoparticles produced with tree leaf extracts. Science of the Total Environment, 15(533), 76–81.
2.png)
