DETEKSI ION LOGAM CU2+ MENGGUNAKAN PENCIL LEAD ELECTRODE TERMODIFIKASI EMAS DENGAN METODE VOLTAMETRI
Keywords:
ion Cu2+, Pencil Lead Electrode, Gold Thin Layer, Cyclic VoltammetryAbstract
Cu²⁺ was electrochemically detected using a Pencil Lead Electrode (PLE) modified with a Gold Thin
Layer. The Au modification on the PLE was performed through electrodeposition using the cyclic
voltammetry technique. This research was conducted to develop a Cu²⁺ sensor using Au-modified PLE
and to determine the optimal conditions for Cu²⁺ detection. The results showed that the modification of the
Pencil Lead Electrode with a Gold Thin Layer provided better catalytic activity compared to the
unmodified Pencil Lead Electrode, using HNO₃ as the supporting electrolyte at pH 1, a calibration curve
was obtained with a correlation coefficient (R²) of 0.9843 and a detection limit (LOD) of 0.19 mM.
Downloads
References
Agristiyani, N., Suprijanto, J., & Ario, R. (2022). Asupan Aman Konsumsi Logam Cu Pada Kerang Darah dari Tempat Pelelangan Ikan Tambak Lorok, Semarang. Buletin Oseanografi Marina, 11(1), 71–76. https://doi.org/10.14710/buloma.v11i1.37143
Bow, Y., Hairul, & Hajar, I. (2015). Penentuan Logam Berat Secara Anodic Stripping Voltammetry Menggunakan Elektroda Grafit Pensil. Prosiding Seminar Nasional Forum In Research, Science, and Technology (FIRST), 61–65. http://eprints.polsri.ac.id/2538/
Honeychurch, K. C. (2019). Review of electroanalytical-based approaches for the
determination of benzodiazepines. Biosensors, 9(4). https://doi.org/10.3390/bios9040130
Kumala Sari, T., Riga, R., & Zubir, M. (2021). Eksakta Article Pencil Lead Electrode Modified with Gold Thin Layer for Voltammetric Detection of Chromium(VI). Eksakta, 22(02), 145–153.
Muharami, R., Sari, C., Marlin, E., & Hartati, Y. W. (2019). Chimica et Natura Acta. 7(3), 138–146.
Pan, H., Liu, Y., Gao, M., Zhu, Y., Lei, Y., & Wang, Q. (2004). Structural and Electrochemical Properties of the La[sub 0.7]Mg[sub 0.3]Ni[sub 2.975−x]Co[sub 0.525]Mn[sub x] Hydrogen Storage Electrode Alloys. Journal of The Electrochemical Society, 151(3), A374. https://doi.org/10.1149/1.1643070
Prasad, B. B., Madhuri, R., Tiwari, M. P., & Sharma, P. S. (2010). Imprinting molecular recognition sites on multiwalled carbon nanotubes surface for electrochemical detection of insulin in real samples. Electrochimica Acta, 55(28), 9146–9156. https://doi.org/10.1016/j.electacta.2010.09.008
Sari, T. K., Riga, R., Zubir, M., Info, A., Science, N., Negeri, U., Science, N., Negeri, U., & Voltammetry, C. (2021). Eksakta. 22(02), 145–153.
Shawabkeh, R., Al-Harahsheh, A., & Al-Otoom, A. (2004). Copper and zinc sorption by treated oil shale ash. Separation and Purification Technology, 40(3), 251–257. https://doi.org/10.1016/j.seppur.2004.03.006