Karakterisasi Performa Genset Diesel 5 KW Menggunakan Syngas Serbuk Kayu dengan Variasi Pembebanan

Authors

  • Wahyu Laboratorium Rekayasa Energi Baru Terbarukan Fakultas Teknik Sultan Ageng Tirtayasa
  • Erwin Universitas Sultan Ageng Tirtayasa
  • Slamet Wiyono Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.25299/rem.2022.vol5.no01.8888

Keywords:

gasification, renewable, sawdust, syngas

Abstract

With the decreasing of world oil reserves, energy savings programs have started across the entire world. Recently, Indonesia has now become one of the importing countries for crude oil. Biomass gasification sustainability, especially in Indonesia, is very guaranteed because of the abundant availability of biomass in Indonesia. The goals of this study are examine the 5 kW diesel generator performance against various load with diesel fuel and diesel fuel plus syngas (synthetic gas) from sawdust. This research was carried out at Renewable Energy Laboratorium of Engineering Faculty UNTIRTA. The author performed this research using 5,2 kW total load of halogen lamp. In this research the load used was only at 3.2 kW because of the "not optimal condition" of the diesel generator resulting in not optimal engine rotation. Diesel generator power value at low loading point was increased. Whereas, at high loading point was decreased.

 

Downloads

Download data is not yet available.

Downloads

Published

2022-02-28